Special Report 3

ODAK Corporation
Committed To Being the Industry Leader In a Leading Industry *Since 1979
The Ultimate In Residential, Commercial and Industrial
Sub-Micron Drinking Water Filtration Systems

SPECIAL REPORT #3

Lead

ODAK Corporation is a strong supporter of environmental education and our company feels privileged to make available this informational report as a means of environmental education and awareness. The mission statement of ODAK Corporation is to provide high quality products, service and support to its customers and distributors. In partial fulfillment of that obligation we are proud to make this report available to you.

Is there lead in my drinking water? Lead can be harmful to your health, but just how harmful depends on how much lead gets into your body, your health, and where the lead becomes stored in your body. This website provides information about lead in drinking water.

Like nitrate, it is difficult to understand why lead in drinking water is a potential health hazard or even a concern. Most people believe that there water comes from pure sources without any contamination or that the water has been treated, so there is not a problem. This is not the cause for lead. The primary source for lead in most drinking water sources is the piping used within a distribution system or the household plumbing. Other routes of lead exposure include: lead paint used in homes prior to 1978, dust or soil containing lead, food grown in contaminated soil or stored in poorly glazed pottery, and more.

Lead The Concern:

Lead is a toxic metal that is harmful to human health; there is NO safe level for lead exposure. The degree of exposure depends on the level of the exposure and route of the exposure (air, water, food). It has been estimated that up to 20 % of the total lead exposure in children can be attributed to a waterborne route, i.e., consuming contaminated water. In addition, infants, fetuses, and young children are particularly vulnerable to lead poisoning. This is because they usually consume more water and are still developing which promotes the lead uptake in their bodies.

High levels of lead contamination in a child can cause coma, convulsions, damage major organs, and cause death. Moderate to low levels of exposure may cause brain neurological damage (hearing disorders) inhibit growth, and cause learning disabilities. There may be no signs of lead poisoning or the signs could mimic a flu or other gastrointestinal disease. The symptoms may include: cramps, irritability, fatigue, vomiting, constipation, sleep disorder, poor appetite, and trouble sleeping. Unlike other contaminants, lead will accumulate within the body over time. Lead will tend to be stored in the brain, bones, kidneys and other major organs. It can be stored in child’s blood for months and bones for many decades. Some of the effects of lead poisoning can not be cured, but it is possible to reduce the amount of lead exposure.

The Lead Source- One Source Drinking Water:

Drinking water is only one of the possible routes of exposure to lead contamination, but it is one of the easiest routes of contamination to reduce. The primary route for lead poisoning in drinking water is not old contamination of the water by leaded fuels, old batteries or some hazardous waste site, the primary route is the distribution system used to carry water to your home and more importantly the plumbing within your home. That is right: YOUR household plumbing may be the cause for lead in your drinking water. In old piping lead was used as the material used to make the piping and/or solder. In homes, built prior to 1930’s water pipes were primarily made from lead. These pipes typically have a dull gray color and can be scratched with a key and a magnet will not stick to them. In buildings built between the 1930’s and early 1980’s, copper pipes were often used, but the solder contained lead. This does not mean that a newer home is safe from lead contamination; in fact, the available data suggests that buildings less than 5 years old can have high levels of lead.

Water Quality as it relates to Lead:

The water quality of your drinking water can have a great impact on the lead level of your water. If your water is soft or corrosive, this type of water can accelerate the leaching of lead and copper from your household plumbing. The signs of this type of problem would include: greenish rings (copper) around basins, metallic or bitter taste to your water especially in the mornings, and frequent leaks/ evidence of corrosion of you household plumbing.

Lead Testing:

If you suspect that your water contains lead, it needs to be analyzed by a certified laboratory, not someone giving a free analysis to sell you some type of treatment systems. You can usually receive a free listing of commercial laboratories from your local county health department or state department of environmental protection. Have you water evaluated for lead, the certified laboratory should request a first draw, after flushing take a second sample and provide you with sampling instructions and containers. At this time, I would also recommend that you have the samples tested for copper and at least one of the samples tested for pH, alkalinity, calcium hardness, and total dissolved solids, plus have the laboratory calculate a corrosivity index.

Action- I think I have a Problem:

1. Contact family physician and see your doctor- Please do not panic, you may not have a problem.
2. Have the members of the household’s blood checked for lead.
3. Have your drinking water analyzed by a certified laboratory.

In the interim, you may be able to flush the water lines to reduce the level of lead contamination. Overnight, the water reacts with the piping and leaches lead out of the piping or solder. Depending on the amount of lead solder in your home, it may be possible to install a neutralizer. A neutralizer would react with the corrosive elements of your water rather than permitting the water to react with the piping. In more extreme cases, it may be necessary to replace some or all of the plumbing with copper lines using a low/no lead solder.

Important Tips:

Hot water usually contains more lead than cold water. Therefore, use cold water when making baby formula and cooking. When considering a point-of-use treatment system, please keep in mind that most systems are certified assuming the water has been treated to or very near potable water quality standards. A carbon or particulate filter does not remove all the lead from the water, but carbon block systems have been tested for lead reduction. A water softener may reduce the level of lead, but if a the water is overly softened it may become corrosive and leach lead from the piping and solder.

References or other resources:

Environmental Quality Center

This is a copyright protected document. To obtain permission to reproduce, distribute, or reprint this article, you must obtain permission from B.F. Environmental Consultants, 15 Hillcrest Drive, Dallas, PA 18612, boram@wilkes.edu, copyright@1987.

Back To Water Contaminants | Special Report #4

Web Design by
ODAK.com